Isns - Cisco MDS 9000 series Command Reference Manual

Chapter 11 I Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

isns

To tag a Gigabit Ethernet or PortChannel interface to an Internet Storage Name Service (iSNS) profile,
use the isns command in interface configuration submode. To untag the interface, use the no form of the
command.
Syntax Description profile-name
Defaults Disabled.
Command Modes
Interface configuration submode.
Command History Release
2.0(x)
Usage Guidelines To use this command, iSNS must be enabled using the isns-server enable command.
Use the isns reregister command in EXEC mode to reregister associated iSNS objects (tagged to an
iSNS profile) with the iSNS server.
Examples
The following example shows how to tag a Gigabit Ethernet interface to an iSNS profile.
switch# config terminal
switch(config)# interface gigabitethernet 1/2
switch(config-if)# isns Profile1
The following example shows how to tag a PortChannel interface to an iSNS profile.
switch# config terminal
switch(config)# interface port-channel 2
switch(config-if)# isns Profile2
Related Commands Command
isns-server enable
isns reregister
show interface gigabitethernet
OL-8413-07, Cisco MDS SAN-OS Release 3.x
isns profile-name
no isns profile-name
Specifies the iSNS profile name.
Modification
This command was introduced.
Description
Enables the iSNS server.
Reregisters the iSNS object.
Displays configuration and status information for a specified
Gigabit Ethernet interface.
Cisco MDS 9000 Family Command Reference
isns
11-111