Debug Sdv - Cisco MDS 9000 series Command Reference Manual

debug sdv

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
debug sdv
To enable debugging for SAN device virtualization, use the debug sdv command in EXEC mode.
Syntax Description
all
all-sdv
ddas
errors
events
ddas-config
packets
discovery
vsan vsan-id
distribution
errors
fu
ha
mgmt
ns
rewrite
trace
virtual-domain
zone-activation
Defaults
Disabled.
Command Modes
EXEC mode.
Command History Release
3.1(2)
Usage Guidelines None.
Cisco MDS 9000 Family Command Reference
6-108
debug sdv {all | all-sdv | ddas {errors | events} | ddas-config {errors | events | packets} |
discovery {errors vsan vsan-id | events vsan vsan-id} | distribution {errors vsan vsan-id |
events vsan vsan-id} | errors vsan vsan-id | fu {ha | transition} | mgmt {errors | events} | ns
{errors | events | packets} | rewrite {errors | events | packets} | trace vsan vsan-id |
virtual-domain {errors vsan vsan-id | events vsan vsan-id} | zone-activation {errors | events
| packets}}
Modification
This command was introduced.
Configures all SDV debugs.
Configures all filters for SDV debugging.
Enables the DDAS debugs.
Enables debugs for errors.
Enables debugs for events.
Enables the DDAS-CFG debugs.
Enables debugs for packets.
Enables the Disc debugs.
Specifies the number of the VSAN. The range is 1 to 4093.
Enables the Dist debugs.
Enables the Error debugs.
Enables the FU debugs.
Enables the FU HA debugs.
Enables the Config FSM debugs.
Enables the NS debugs.
Enables the Rewrite debugs.
Enables the Trace debugs.
Enables the Virtual Domain debugs.
Enables the ZS-ACTV debugs.
Chapter 6 Debug Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x