Discover Custom-List - Cisco MDS 9000 series Command Reference Manual

Chapter 5 D Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

discover custom-list

To selectively initiate discovery for specified domain IDs in a VSAN, use the discover custom-list
command in EXEC mode.
Syntax Description add
delete
vsan vsan-id
fcip fc-id
Defaults
None.
Command Modes EXEC mode.
Command History Release
1.1(1)
Usage Guidelines
None.
Examples
The following example selectively initiates discovery for the specified VSAN and FCID.
switch# discover custom-list add vsan 1 fcid 0X123456
The following example deletes the specified VSAN and FCID from the customized list.
switch# discover custom-list delete vsan 1 fcid 0X123456
OL-8413-07, Cisco MDS SAN-OS Release 3.x
discover custom-list {add | delete} vsan vsan-id fcid fc-id
Add a targets to the customized list.
Deletes a target from the customized list.
Discovers SCSI targets for the specified VSAN ID. The range is 1 to 4093.
Discovers SCSI targets for the specified FCID. The format is 0xhhhhhhh,
where h is a hexadecimal digit.
Modification
This command was introduced.
Cisco MDS 9000 Family Command Reference
discover custom-list
5-29