Ficon Vsan (Configuration Mode) - Cisco MDS 9000 series Command Reference Manual

ficon vsan (configuration mode)

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
ficon vsan (configuration mode)
To enable the FICON feature in a specified VSAN, use the ficon vsan command in configuration mode.
To disable the feature or to revert to factory defaults, use the no form of the command.
Syntax Description
vsan vsan-id
Defaults None.
Command Modes Configuration mode.
Command History Release
1.3(1)
Usage Guidelines An IPL configuration file is automatically created
Once you enable FICON, you cannot disable in-order delivery, fabric binding, or static domain ID
configurations.
When you disable FICON, the FICON configuration file is also deleted.
This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP c-Class
Note
BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter.
Examples The following example enables FICON on VSAN 2.
switch(config)# ficon vsan 2
The following example disables FICON on VSAN 6.
switch(config)# no ficon vsan 6
Related Commands Command
show ficon
Cisco MDS 9000 Family Command Reference
8-70
ficon vsan vsan-id
no ficon vsan vsan-id
Enters the FICON configuration mode for the specified VSAN (from 1 to 4096).
Modification
This command was introduced.
Description
Displays configured FICON details.
Chapter 8 F Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x