Clear Crypto Sa Domain Ipsec - Cisco MDS 9000 series Command Reference Manual

clear crypto sa domain ipsec

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
clear crypto sa domain ipsec
To clear the security associations for IPsec, use the clear crypto sa domain ipsec command.
Syntax Description interface gigabitethernet
slot/port
inbound
outbound
sa sa-index
Defaults
None.
Command Modes EXEC mode.
Command History Release
2.0(x)
Usage Guidelines
To clear security associations, IPsec must be enabled using the crypto ipsec enable command.
Examples
The following example shows how to clear a security association for an interface.
switch# clear crypto sa domain ipsec interface gigabitethernet 1/2 inbound sa 1
Related Commands Command
show crypto sad
domain ipsec
Cisco MDS 9000 Family Command Reference
4-34
clear crypto sa domain ipsec interface gigabitethernet slot/port {inbound | outbound}
sa sa-index
Modification
This command was introduced.
Description
Displays IPsec security association database information.
Specifies the Gigabit Ethernet interface.
Specifies clearing inbound associations.
Specifies clearing output associations.
Specifies the security association index. The range is 1 to 2147483647.
Chapter 4 C Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x