Autonomous-Fabric-Id Database - Cisco MDS 9000 series Command Reference Manual

Chapter 2 A Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

autonomous-fabric-id database

To configure an autonomous fabric ID (AFID) database, use the autonomous-fabric-id database
command. To remove the fabric AFID database, use the no form of the command.
Syntax Description
This command has no arguments or keywords.
Defaults
None.
Command Modes Configuration mode.
Command History Release
2.1(1a)
Usage Guidelines
You must configure the IVR VSAN topology to auto mode, using the ivr vsan-topology auto command,
before you can use the autonomous-fabric-id database command to modify the database. The
autonomous-fabric-id database command also enters AFID database configuration submode.
In user-configured VSAN topology mode, the AFIDs are specified in the IVR VSAN topology
Note
configuration itself and a separate AFID configuration is not needed.
Examples
The following example shows how to create an AFID database and enters AFID database configuration
submode.
switch# config terminal
Enter configuration commands, one per line.
switch(config)# autonomous-fabric-id database
switch(config-afid-db)#
Related Commands Command
ivr vsan-topology auto
switch-wwn
show autonomous-fabric-id database
show ivr
OL-8413-07, Cisco MDS SAN-OS Release 3.x
autonomous-fabric-id database
no autonomous-fabric-id database
Modification
This command was introduced.
End with CNTL/Z.
Description
Configures a VSAN topology for Inter-VSAN Routing
(IVR) to auto configuration mode.
Configures a switch WWN in the autonomous fabric ID
(AFID) database
Displays the contents of the AFID database.
Displays IVR feature information.
Cisco MDS 9000 Family Command Reference
autonomous-fabric-id database
2-25