Attribute Qos - Cisco MDS 9000 series Command Reference Manual

attribute qos

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
attribute qos
To configure a QOS attribute, use the attribute qos command in Inter-VSAN Routing (IVR) zone
configuration submode. To disable this feature, use the no form of this command.
Syntax Description
high
low
medium
Defaults
Disabled.
Command Modes IVR zone configuration submode.
Command History Release
2.1(1a)
Usage Guidelines
None.
Examples The following example shows how to configure an IVR zone QOS attribute to low priority.
switch# config terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)# ivr zone name IvrZone
switch(config-ivr-zone)# attribute qos priority low
Related Commands Command
show ivr zone
Cisco MDS 9000 Family Command Reference
2-18
attribute qos {high | low | medium}
no attribute qos {high | low | medium}
Configures frames matching zone to get high priority.
Configures frames matching zone to get low priority (Default).
Configures frames matching zone to get medium priority.
Modification
This command was introduced.
Description
Displays IVR zone configuration.
Chapter 2 A Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x