Qos Dwrr-Q - Cisco MDS 9000 series Command Reference Manual

qos dwrr-q

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
qos dwrr-q
To associate a weight with a deficit weighted round robin (DWRR) scheduler queue, use the qos dwrr-q
command in configuration mode. To remove a previously-configured class, use the no form of the
command.
Syntax Description high
low
medium
weight value
Defaults 10
Command Modes Configuration mode.
Command History Release
1.3(1)
Usage Guidelines You can access this command only if you enable the QoS data traffic feature using the qos enable
command.
Examples
The following example specifies the DWRR queue priority.
switch# config terminal
switch(config)# qos dwrr-q high weight 50
The following example reverts to the default value of 10.
switch(config)# no qos dwrr-q high weight 50
Related Commands Command
show qos
Cisco MDS 9000 Family Command Reference
19-4
qos dwrr-q {high | low | medium} weight value
no qos dwrr-q {high | low | medium} weight value
Modification
This command was introduced.
Description
Displays configured QoS information.
Assigns the DWRR queue high option to DWRR queues.
Assigns the DWRR queue low option to DWRR queues.
Assigns the DWRR queue medium option to DWRR queues.
Specifies DWRR queue weight
Chapter 19 Q Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x