Cisco MDS 9000 series Command Reference Manual page 74

Navigating Through CLI Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Table 1-6
Cisco MDS 9000 Family Port
fc1/1
fc1/2
fc1/3
fc1/4
fc1/5
fc1/6
fc1/7
fc1/8
fc1/9
fc1/10
fc1/11
fc1/12
fc1/13
fc1/14
fc1/15
fc1/16
fc1/17
fc1/18
fc1/19
fc1/20
When you enter commands that require port names for the Cisco Fabric Switch for HP c-Class
BladeSystem or the Cisco Fabric Switch for IBM BladeCenter, use the appropriate naming convention
from either
port names.
Example 1-2
switch# config t
Enter configuration commands, one per line.
chester-1(config)# interface ext2
chester-1(config-if)#
Example 1-3
switch# show interface bay 5
Cisco MDS 9000 Family Command Reference
1-16
Port Mapping Between the Cisco MDS 9000 Family and the Cisco Fabric Switch for
IBM BladeCenter
Cisco Fabric Switch for IBM
BladeCenter Port
ext19
bay10
bay11
bay12
ext18
bay9
bay13
bay14
bay8
ext17
bay6
bay5
bay7
ext16
bay4
bay2
bay3
ext0
bay1
ext15
Table 1-5 or Table 1-6. See
interface Command
show interface Command
Example 1-2 and Example 1-3
End with CNTL/Z.
Chapter 1 CLI Overview
Port Group
PortGroup 1
PortGroup 2
PortGroup 3
PortGroup 4
PortGroup 5
for typical commands that require
OL-8413-07, Cisco MDS SAN-OS Release 3.x