Debug Fm - Cisco MDS 9000 series Command Reference Manual

debug fm

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
debug fm
To enable feature manager debugging, use the debug fm command in EXEC mode. To disable a debug
command, use the no form of the command or use the no debug all command to turn off all debugging.
Syntax Description
error
flow
Defaults Disabled.
Command Modes EXEC mode.
Command History Release
1.0(2)
Usage Guidelines
None.
Examples The following example displays the system output when the debug fm flow command is issued:
switch# debug fm flow
switch# 2005 Mar 10 02:40:19 feature-mgr: fm_event_loop: ----------- EVENT START
2005 Mar 10 02:40:19 feature-mgr: fm_event_loop: received MTS message:
2005 Mar 10 02:40:19 feature-mgr: fm_event_loop: Src: 0x00000601/27
ID: 0x006A0FC4
HA_SEQNO: 0x00000000
2005 Mar 10 02:40:19 feature-mgr: fm_handle_cmi_get_feature_op: Get feature (1) op request
2005 Mar 10 02:40:19 feature-mgr: fm_handle_cmi_get_feature_op: Reply to get feature ivr
op request: op 2, op_state 0, result 0x0 (success)
2005 Mar 10 02:40:19 feature-mgr: fm_event_loop: ----------- EVENT START
2005 Mar 10 02:40:19 feature-mgr: fm_event_loop: received MTS message:
2005 Mar 10 02:40:19 feature-mgr: fm_event_loop: Src: 0x00000601/27
ID: 0x006A0FC6
HA_SEQNO: 0x00000000
2005 Mar 10 02:40:19 feature-mgr: fm_handle_cmi_get_feature_op: Get feature (1) op request
2005 Mar 10 02:40:19 feature-mgr: fm_handle_cmi_get_feature_op: Reply to get feature ivr
op request: op 2, op_state 0, result 0x0 (success)
Cisco MDS 9000 Family Command Reference
6-54
debug fm {error | flow}
no debug fm {error | flow}
Modification
This command was introduced.
Size: 160 [REQ] Opc: 8922 (MTS_OPC_FM_CMI_GET_FEATURE_OP) RR: 0x006A0FC4
TS: 0x2524B48D52B53
Size: 160 [REQ] Opc: 8922 (MTS_OPC_FM_CMI_GET_FEATURE_OP) RR: 0x006A0FC6
TS: 0x2524B48EBF55D
Enables debugging for feature manager error conditions.
Enables debugging for the feature manager flow.
REJ:0
REJ:0
Chapter 6
Dst: 0x00000601/121
SYNC:0
Dst: 0x00000601/121
SYNC:0
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Debug Commands