Class - Cisco MDS 9000 series Command Reference Manual

class

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
class
To select a QoS policy map class for configuration, use the class command in QoS policy map
configuration submode. To disable this feature, use the no form of the command.
Syntax Description
class-map-name
Defaults Disabled
Command Modes QoS policy map configuration submode
Command History Release
1.3(1)
Usage Guidelines Before you can configure a QoS policy map class you must complete the following:
•
•
•
After you configure the QoS policy map class, you can configure the Differentiated Services Code Point
(DSCP) and priority for frames matching this class map.
Examples The following example shows how to select a QoS policy map class to configure.
switch# config terminal
Enter configuration commands, one per line.
switch(config)# qos enable
switch(config)# qos class-map class-map1
switch(config)# qos policy-map policyMap1
switch(config-pmap)# class class-map1
switch(config-pmap-c)#
Related Commands Command
qos enable
qos class-map
qos policy-map
dscp
Cisco MDS 9000 Family Command Reference
4-24
class class-map-name
no class class-map-name
Selects the QoS policy class map to configure.
Modification
This command was introduced.
Enable the QoS data traffic feature using the qos enable command.
Configure a QoS class map using the qos class-map command.
Configure a QoS policy map using the qos policy-map command.
Description
Enables the QoS data traffic feature on the switch.
Configures a QoS class map.
Configures a QoS policy map.
Configures the DSCP in the QoS policy map class.
End with CNTL/Z.
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands