In-Order-Guarantee - Cisco MDS 9000 series Command Reference Manual

in-order-guarantee

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
in-order-guarantee
To enable in-order delivery, use the in-order-guarantee command in configuration mode. To disable
in-order delivery, use the no form of the command.
Syntax Description
vsan vsan-id
Defaults Disabled.
Command Modes Configuration mode.
Command History Release
1.3(4)
Usage Guidelines In-order delivery of data frames guarantees frame delivery to a destination in the same order that they
were sent by the originator.
Examples
The following example shows how to enable in-order delivery for the entire switch.
switch# config terminal
switch(config) # in-order-guarantee
The following example shows how to disable in-order delivery for the entire switch.
switch(config)# no in-order-guarantee
The following example shows how to enable in-order delivery for a specific VSAN.
switch(config)# in-order-guarantee vsan 3452
The following example shows how to disable in-order delivery for a specific VSAN.
switch(config)# no in-order-guarantee vsan 101
Related Commands Command
show in-order-guarantee
Cisco MDS 9000 Family Command Reference
11-4
in-order-guarantee [vsan vsan-id]
no in-order-guarantee [vsan vsan-id]
Specifies a VSAN ID. The range is 1 to 4093.
Modification
This command was introduced.
Description
Displays the in-order-guarantee status.
Chapter 11 I Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x