Fcsp Dhchap - Cisco MDS 9000 series Command Reference Manual

fcsp dhchap

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
fcsp dhchap
To configure DHCHAP options in a switch, use the fcsp dhchap command in configuration mode. This
command is only available when the FC-SP feature is enabled. Use the no form of the command to revert
to factory defaults.
Syntax Description devicename
switch-wwn
dhgroup
0
1| 2 | 3 | 4
hash
md5
sha1
password
0
7
password
wwn-id
Defaults
Disabled.
Command Modes
Configuration mode.
Command History Release
1.3(1)
Usage Guidelines You can only see the fcsp dhchap command if you issue the fcsp enable command.
Using SHA-1 as the hash algorithm may prevent RADIUS or TACACS+ usage.
If you change the DH group configuration, ensure to change it globally for all switches in the fabric.
Cisco MDS 9000 Family Command Reference
8-46
fcsp dhchap {devicename switch-wwn password [0 | 7] password |
dhgroup [0 | 1| 2 | 3 | 4] |
hash [md5 | sha1] |
password [0 | 7] password [wwn wwn-id]
no fcsp dhchap {devicename switch-wwn password [0 | 7] password |
dhgroup [0 | 1| 2 | 3 | 4] |
hash [md5 | sha1] |
password [0 | 7] password [wwn-id]
Configures a password of another device in the fabric
Provides the WWN of the device being configured
Configures DHCHAP Diffie-Hellman group priority list.
Null DH—no exchange is performed (default).
Specifies one or more of the groups specified by the standards.
Configures DHCHAP Hash algorithm priority list in order of preference.
Specifies the MD5 Hash algorithm.
Specifies the SHA-1 Hash algorithm
Configures DHCHAP password for the local switch.
Specifies a clear text password.
Specifies a password in encrypted text.
Provides the password with a maximum of 64 alphanumeric characters
The WWN ID with the format hh:hh:hh:hh:hh:hh:hh:hh.
Modification
This command was introduced.
Chapter 8 F Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x