Interface Mgmt - Cisco MDS 9000 series Command Reference Manual

interface mgmt

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
interface mgmt
To configure a management interface, use the interface mgmt command in configuration mode.
Syntax Description
number
Defaults Disabled.
Command Modes Configuration mode.
Command History Release
1.0(2)
Usage Guidelines When you try to shutdown a management interface(mgmt0), a follow-up message confirms your action
before performing the operation. Use the force option to bypass this confirmation, if required.
Examples
The following example configures the management interface, displays the options available for the
configured interface, and exits to configuration mode.
switch# config terminal
switch(config)#
switch(config)# interface mgmt 0
switch(config-if)# exit
switch(config)#
The following example shuts down the interface without using the force option:
switch# config terminal
switch(config)# interface mgmt 0
switch(config-if)# shutdown
Shutting down this interface will drop all telnet sessions.
Do you wish to continue (y/n)? y
The following example shuts down the interface using the force option:
switch# config terminal
switch(config)# interface mgmt 0
switch(config-if)# shutdown force
switch(config-if)#
Related Commands Command
show interface mgmt
Cisco MDS 9000 Family Command Reference
11-34
interface mgmt number
Specifies the management interface number which is 0.
Modification
This command was introduced.
Description
Displays interface configuration for specified interface.
Chapter 11 I Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x