Debug Cfs - Cisco MDS 9000 series Command Reference Manual

Chapter 6 Debug Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

debug cfs

To enable debugging for Cisco Fabric Services (CFS), use the debug cfs command in EXEC mode. To
disable a debug command, use the no form of the command or use the no debug all command to turn
off all debugging.
Syntax Description all
errors
events
db
vsan vsan-id
fc2
fsm-action
fsm-trans
sap sap-id
mts
pss
fsm
ha
trans
merge
Defaults None.
Command Modes EXEC mode.
Command History Release
2.0(x)
Usage Guidelines None.
OL-8413-07, Cisco MDS SAN-OS Release 3.x
debug cfs {all | errors | events {db [vsan vsan-id] | fc2 [vsan vsan-id] | fsm-action [vsan vsan-id]
| fsm-trans [sap sap-id] | mts [vsan vsan-id] | pss [vsan vsan-id]} | fsm {ha | trans} | merge}
no debug cfs {all | errors | events {db [vsan vsan-id] | fc2 [vsan vsan-id] | fsm-action [vsan
vsan-id] | fsm-trans [sap sap-id] | mts [vsan vsan-id] | pss [vsan vsan-id]} | fsm {ha | trans}
| merge}
Enables all CFS debugging.
Enables debugging for CFS error conditions.
Enables debugging for CFS events.
Enables debugging for CFS database events.
Restricts debugging to the specified VSAN ID. The range is 1 to 4093.
Enables debugging for CFS FC2 events.
Enables debugging for CFS FSM action events.
Enables debugging for CFS FSM transition events.
Restricts debugging to the specified SAP ID. The range is 0 to 2147483647
Enables debugging for CFS MTS events.
Enables debugging for CFS PSS events.
Enables debugging for CFS FSM events.
Enables debugging for CFS FSM high availability events.
Enables debugging for CFS FSM transition events.
Enables debugging for CFS merge events.
Modification
This command was introduced.
Cisco MDS 9000 Family Command Reference
debug cfs
6-13