Cisco MDS 9000 series Command Reference Manual page 880

scsi-target
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
The following example removes a SCSI target discovery.
switch# config t
switch(config)# no scsi-target discovery
The following example configures SCSI target ns-polling discovery for VSAN 1.
switch# config t
switch(config)# scsi-target ns-poll vsan 1
The following example removes SCSI target ns-polling discovery for VSAN 1.
switch# config t
switch(config)# no scsi-target ns-poll vsan 1
The following example configures SCSI target on-demand discovery for VSAN 1.
switch# config t
switch(config)# scsi-target on-demand vsan 1
The following example removes SCSI target on-demand discovery for VSAN 1.
switch# config t
switch(config)# no scsi-target on-demand vsan 1
Related Commands Command
discover scsi-target
show scsi-target
Cisco MDS 9000 Family Command Reference
21-12
Description
Discovers SCSI targets on local storage to the switch or remote storage across
the fabric.
Displays information about existing SCSI target configurations.
Chapter 21 S Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x