Cisco MDS 9000 series Command Reference Manual page 832

radius-server host
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Defaults Idle-time is not set. Server monitoring is turned off.
Timeout is 1 second.
Username is test.
Password is test.
Command Modes
Configuration mode.
Command History Release
1.0(2)
3.0(1)
Usage Guidelines When the idle time interval is 0 minutes, periodic RADIUS server monitoring is not performed.
Examples The following example configures RADIUS server authentication parameters.
switch# config terminal
switch(config)# radius-server host 10.10.2.3 key HostKey
switch(config)# radius-server host 10.10.2.3 auth-port 2003
switch(config)# radius-server host 10.10.2.3 acct-port 2004
switch(config)# radius-server host 10.10.2.3 accounting
switch(config)# radius-server host radius2 key 0 abcd
switch(config)# radius-server host radius3 key 7 1234
switch(config)# radius-server host 10.10.2.3 test idle-time 10
switch(config)# radius-server host 10.10.2.3 test username tester
switch(config)# radius-server host 10.10.2.3 test password 2B9ka5
Related Commands Command
show radius-server
Cisco MDS 9000 Family Command Reference
20-8
Modification
This command was introduced.
Added the ipv6-address argument and the test option.
Description
Displays RADIUS server information.
Chapter 20 R Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x