Debug Isns - Cisco MDS 9000 series Command Reference Manual

debug isns

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
debug isns
To enable debugging for Internet storage name services (iSNS), use the debug isns command in EXEC
mode. To disable a debug command, use the no form of the command or use the no debug all command
to turn off all debugging.
Syntax Description
all
bypass ficon_mgr
cloud
db
deque
error
event
vsan vsan-id
fabric distribute
ha
prot
trace
detail
warning
Defaults None.
Command Modes EXEC mode.
Command History Release
2.0(x)
Usage Guidelines
To use this command, iSNS must be enabled using the isns-server enable command.
Examples The following example displays the system output when the debug isns error command is issued.
switch# debug isns error
Cisco MDS 9000 Family Command Reference
6-70
debug isns {all | bypass ficon_mgr | cloud | db | deque | error | event [vsan vsan-id] |
fabric distribute | ha [vsan vsan-id] | prot | trace [detail] | warning [vsan vsan-id]}
no debug isns {all | bypass ficon_mgr | cloud | db | deque | error | event [vsan vsan-id] |
fabric distribute | ha [vsan vsan-id] | prot | trace [detail] | warning [vsan vsan-id]}
Enables all iSNS debugging.
Enables bypassing FICON manager execution.
Enables debugging for iSNS cloud discovery.
Enables debugging for iSNS database.
Enables debugging for iSNS message dequeue.
Enables debugging for iSNS error.
Enables debugging for iSNS event.
Restricts debugging to the specified VSAN ID. The range is 1 to 4093.
Enables debugging for iSNS fabric distribution.
Enables debugging for iSNS high availability.
Enables debugging for iSNS protocol.
Enables debugging for iSNS trace.
Enables detailed iSNS trace.
Enables debugging for iSNS warning.
Modification
This command was introduced.
Chapter 6 Debug Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x