Debug Vrrp - Cisco MDS 9000 series Command Reference Manual

debug vrrp

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
debug vrrp
To enable debugging for a Virtual Router Redundancy Protocol (VRRP), use the debug vrrp command
in EXEC mode. To disable a debug command, use the no form of the command or use the no debug all
command to turn off all debugging.
Syntax Description configuration
engine
all
error
event
info
Defaults Disabled.
Command Modes EXEC mode.
Command History Release
1.0(2)
Usage Guidelines
None.
Examples The following example displays the system output when the debug vrrp engine all command is issued:
switch# debug vrrp engine all
Apr 29 17:35:58 vrrp_eng: fu_priority_select:
fd[11] for select call
call
Apr 29 17:35:58 vrrp_eng: fu_priority_select_select_queue: round credit(6)
Apr 29 17:35:58 vrrp_eng:
priority(2), credit(1), empty
Apr 29 17:35:58 vrrp_eng: fu_priority_select: returning FU_PSEL_Q_CAT_FD queue, fd(7),
usr_q_info(3)
Apr 29 17:35:58 vrrp_eng: heartbeat sent
Apr 29 17:35:58 vrrp_eng: message not processed by system mgr library , so process it
normal way
Cisco MDS 9000 Family Command Reference
6-124
debug vrrp {configuration | engine} {all | error | event | info}
no debug vrrp {configuration | engine} {all | error | event | info}
Modification
This command was introduced.
- setting fd[12] for select call
- setting fd[15] for select call
Enables VRRP configuration debugging.
Enables VRRP engine debugging.
Enables debugging for all VRRP features.
Enables debugging for VRRP error conditions.
Enables debugging for VRRP events.
Enables debugging for VRRP events.
- setting fd[7] for select call - setting
curr_q - FU_PSEL_Q_CAT_FD, usr_q_info(6), fd(15),
Chapter 6 Debug Commands
- setting fd [13] for select
OL-8413-07, Cisco MDS SAN-OS Release 3.x