Ntp Commit - Cisco MDS 9000 series Command Reference Manual

Chapter 16 N Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

ntp commit

To apply the pending configuration pertaining to the Network Time Protocol (NTP) Cisco Fabric
Services (CFS) distribution session in progress in the fabric, use the ntp commit command in
configuration mode.
Syntax Description
This command has no other arguments or keywords.
Defaults
None.
Command Modes Configuration mode.
Command History Release
2.0(x)
Usage Guidelines
None.
Examples
The following example shows how to commit changes to the active NTP configuration.
switch# config terminal
switch(config)# ntp commit
Related Commands Command
ntp distribute
show ntp
OL-8413-07, Cisco MDS SAN-OS Release 3.x
ntp commit
Modification
This command was introduced.
Description
Enables CFS distribution for NTP.
Displays NTP information.
Cisco MDS 9000 Family Command Reference
ntp commit
16-11