Debug Fcs - Cisco MDS 9000 series Command Reference Manual

debug fcs

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
debug fcs
To enable debugging for the fabric configuration server, use the debug fcs command in EXEC mode. To
disable a debug command, use the no form of the command or use the no debug all command to turn
off all debugging.
Syntax Description all
discovery events
errors
mts events
pss events
brief
detail
queries events
registration events
rscn events
snmp events
vsan vsan-id
Defaults Disabled.
Command Modes EXEC mode.
Command History Release
1.0(2)
Usage Guidelines
None.
Examples The following example displays the system output when the debug fcs all command is issued:
switch# debug fcs all
Cisco MDS 9000 Family Command Reference
6-44
debug fcs {all | discovery events | errors [vsan vsan-id] | ess-events [vsan vsan-id] |
mts events {brief | detail} | pss events | queries events [vsan vsan-id] |
registrations events [vsan vsan-id] | rscn events [vsan vsan-id] | snmp events}
no debug fcs {all | discovery events | errors [vsan vsan-id] | ess-events [vsan vsan-id] |
mts events {brief | detail} | pss events | queries events [vsan vsan-id] |
registrations events [vsan vsan-id] | rscn events [vsan vsan-id] | snmp events}
Modification
This command was introduced.
Enables debugging for all FCS features.
Enables debugging for FCS discovery events.
Enables debugging for FCS error conditions.
Enables debugging for FCS tx/rx MTS events.
Enables debugging for FCS
Provides brief information for each event.
Provides detailed information for each event.
Enables debugging for FCS tx/rx events.
Enables debugging for FCS PSS related events.
Enables debugging for FCS RSCN events.
Enables debugging for FCS SNMP events.
Restricts debugging to the specified VSAN.
Chapter 6 Debug Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x