Fcinterop Loop-Monitor - Cisco MDS 9000 series Command Reference Manual

Chapter 8 F Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

fcinterop loop-monitor

To monitor removal of discs from a loop port, use the fcinterop loop-monitor command in configuration
mode. To disable loop monitoring, use the no form of the command.
Syntax Description
This command has no other arguments or keywords.
Defaults
Disabled.
Command Modes Configuration mode.
Command History Release
1.0(2)
Usage Guidelines
This command detects devices that are removed from a looped port.
Examples
The following example shows how to enables monitoring of NL ports in a loop.
switch# config terminal
switch(config)# fcinterop loop-monitor
The following example shows how to disable monitoring of NL ports in a loop.
switch# config terminal
switch(config)# no fcinterop loop-monitor
Related Commands Command
show flogi database
OL-8413-07, Cisco MDS SAN-OS Release 3.x
fcinterop loop-monitor
no fcinterop loop-monitor
Modification
This command was introduced.
Description
Verify if a storage device is displayed in the Fabric login (FLOGI) table.
Cisco MDS 9000 Family Command Reference
fcinterop loop-monitor
8-31