Abort - Cisco MDS 9000 series Command Reference Manual

Chapter 2 A Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

abort

To discard a Call Home configuration session in progress, use the abort command in Call Home
configuration submode.
Syntax Description This command has no other arguments or keywords.
Defaults None.
Command Modes
Call Home configuration submode
Command History Release
2.0(1b)
Usage Guidelines None.
Examples The following example shows how to discard a Call Home configuration session in progress.
switch# config terminal
Enter configuration commands, one per line.
switch(config)# callhome
switch(config-callhome)# abort
Related Commands Command
callhome
callhome test
show callhome
OL-8413-07, Cisco MDS SAN-OS Release 3.x
abort
Modification
This command was introduced.
Description
Configures the Call Home function.
Sends a dummy test message to the configured destination(s).
Displays configured Call Home information.
End with CNTL/Z.
Cisco MDS 9000 Family Command Reference
abort
2-11