Mkdir - Cisco MDS 9000 series Command Reference Manual

mkdir

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
mkdir
To create a directory in the Flash file system, use the mkdir command in EXEC mode.
Syntax Description
directory
Defaults None.
Command Modes EXEC
Command History Release
1.0(2)
Usage Guidelines This command is only valid on Class C Flash file systems.
You can specify whether to create the directory on bootflash:, slot0, or volatile:. If you do not specify
the device, the switch creates the directory on the current directory.
Examples
The following example creates a directory called test in the slot0: directory.
switch# mkdir slot0:test
The following example creates a directory called test at the current directory level. If the current
directory is slot0:mydir, this command creates a directory called slot0:mydir/test.
switch# mkdir test
Related Commands Command
dir
rmdir
Cisco MDS 9000 Family Command Reference
15-14
mkdir directory
Name of the directory to create.
Modification
This command was introduced.
Description
Displays a list of files on a file system.
Removes an existing directory in the Flash file system.
Chapter 15 M Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x