Crypto Ike Domain Ipsec Rekey Sa - Cisco MDS 9000 series Command Reference Manual

Chapter 4 C Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

crypto ike domain ipsec rekey sa

To rekey an IKE crypto security association (SA) in the IPsec domain, use the crypto ike domain ipsec
rekey sa command.
Syntax Description sa-index
Defaults
None.
Command Modes
EXEC mode.
Command History Release
2.0(x)
Usage Guidelines
To use this command, IKE must be enabled using the crypto ike enable command.
This command is not supported on the Cisco MDS 9124 switch.
Note
Examples The following example rekeys an IKE crypto SA.
switch# crypto ike domain ipsec rekey sa 100
Related Commands Command
crypto ike enable
show crypto ike domain ipsec Displays IKE information for the IPsec domain.
OL-8413-07, Cisco MDS SAN-OS Release 3.x
crypto ike domain ipsec rekey sa sa-index
Specifies the SA index. The range is 1 to 2147483647.
Modification
This command was introduced.
Description
Enables the IKE protocol.
Cisco MDS 9000 Family Command Reference
crypto ike domain ipsec rekey sa
4-121