Clear Ips Stats - Cisco MDS 9000 series Command Reference Manual

clear ips stats

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
clear ips stats
To clear IP storage statistics, use the clear ips stats command in EXEC mode.
Syntax Description
all
interface
gigabitethernet
slot/port
buffer
dma-bridge
icmp
ip
ipv6
mac
tcp
Defaults None.
Command Modes
EXEC mode.
Command History Release
3.0(1)
Examples The following example clears all IPS statistics on the specified interface.
switch# clear ips all interface gigabitethernet 8/7
switch#
Cisco MDS 9000 Family Command Reference
4-50
clear ips stats {all [interface gigabitethernet slot/port] |
buffer interface gigabitethernet slot/port |
dma-bridge interface gigabitethernet slot/port |
icmp interface gigabitethernet slot/port |
ip interface gigabitethernet slot/port |
ipv6 traffic interface gigabitethernet slot/port |
mac interface gigabitethernet slot/port |
tcp interface gigabitethernet slot/port}
Clears all IPS statistics.
Clears the Gigabit Ethernet interface.
Specifies the slot and port numbers.
Clears IP storage buffer information.
Clears direct memory access (DMA) statistics.
Clears ICMP statistics.
Clears IP statistics.
Clears IPv6 statistics.
Clears Ethernet MAC statistics.
Clears TCP statistics.
Modification
This command was introduced.
Chapter 4 C Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x