Mcast Root - Cisco MDS 9000 series Command Reference Manual

Chapter 15 M Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

mcast root

To configure the multicast feature, use the mcast root command in configuration mode. To revert to the
default, use the no form of the command.
Syntax Description
lowest
principal
vsan vsan-id
Defaults
principal
Command Modes Configuration mode.
Command History Release
2.0(x)
Usage Guidelines
None.
Examples The following example shows how to configure the multicast root VSAN.
switch# config terminal
switch(config)# mcast root principal vsan 4001
Related Commands Command
show mcast
OL-8413-07, Cisco MDS SAN-OS Release 3.x
mcast root {lowest | principal} vsan vsan-id
no mcast root {lowest | principal} vsan vsan-id
Specifies the lowest domain switch as root.
Specifies the principal switch as root.
Specifies the VSAN ID. The range is 1 to 4093.
Modification
This command was introduced.
Description
Displays multicast information.
Cisco MDS 9000 Family Command Reference
mcast root
15-5