Interface Vsan - Cisco MDS 9000 series Command Reference Manual

Chapter 11 I Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

interface vsan

To configure a VSAN interface, use the interface vsan command. To remove a VSAN interface, use the
no form of the command.
Syntax Description
vsan-id
Defaults Disabled.
Command Modes Configuration mode.
Command History Release
1.0(2)
Usage Guidelines None.
Examples The following example selects a VSAN interface and enters interface configuration submode.
switch# config terminal
switch(config)# interface vsan 1
switch(config-if)#
Related Commands Command
show interface
OL-8413-07, Cisco MDS SAN-OS Release 3.x
interface vsan vsan-id
no interface vsan vsan-id
Specifies the VSAN ID. The range is 1 to 4093.
Modification
This command was introduced.
Description
Displays interface configuration for specified interface.
Cisco MDS 9000 Family Command Reference
interface vsan
11-37