Debug Aaa - Cisco MDS 9000 series Command Reference Manual

debug aaa

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
debug aaa
To enable debugging for boot variables, use the debug aaa command in EXEC mode. To disable a debug
command, use the no form of the command or use the no debug all command to turn off all debugging.
Syntax Description
all
conf-events
errors
events
mts
Defaults
Disabled.
Command Modes EXEC mode.
Command History Release
1.3(1)
Usage Guidelines None.
Examples
The following example displays the system output when the debug aaa conf-events command is issued:
switch# debug aaa conf-events
Nov 20 06:29:52 aaa: aaa_cleanup_session
Nov 20 06:29:52 aaa: mts_drop of request msg
Nov 20 06:29:52 aaa: Configured method local Succeeded
Nov 20 06:29:58 aaa: Src: 0x00000101/10886
ize: 197 [REQ] Opc: 8402 (MTS_OPC_AAA_REQ) RR: 0x003A48F7
TS: 0x9FC1C1234E7C
Nov 20 06:29:58 aaa: 01 01 0C 00 00 00 00 00 00 00 00 00 00 00 02 01
Nov 20 06:29:58 aaa: 00 00 00 00 00 00 00 06 08 00 03 05 00 00 00 00
Nov 20 06:29:58 aaa: 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Nov 20 06:29:58 aaa: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Nov 20 06:29:58 aaa: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Nov 20 06:29:58 aaa: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Nov 20 06:29:58 aaa: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Nov 20 06:29:58 aaa: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Nov 20 06:29:58 aaa: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Nov 20 06:29:58 aaa: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Cisco MDS 9000 Family Command Reference
6-2
debug aaa {all | conf-events | errors | events | mts}
no debug aaa {all | conf-events | errors | events | mts}
Modifications
This command was introduced.
REJ:0
Enables all AAA debug options.
Enables AAA configuration events debugging.
Enables debugging for AAA errors.
Enables debugging for AAA events.
Enables AAA transmit and receive MTS packets debugging.
Dst: 0x00000101/0
SYNC:0
Chapter 6 Debug Commands
ID: 0x003
HA_SEQNO: 0x0
OL-8413-07, Cisco MDS SAN-OS Release 3.x