Fspf Enable Vsan - Cisco MDS 9000 series Command Reference Manual

fspf enable vsan

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
fspf enable vsan
To enable FSPF for a VSAN, use the fspf enable command in configuration mode. To disable FSPF
routing protocols, use the no form of the command.
Syntax Description
vsan vsan-id
Defaults Enabled
Command Modes Configuration mode.
Command History Release
1.0(2)
Usage Guidelines This command configures FSPF on VSANs globally.
Examples The following example enables FSPF in VSAN 5 and disables FSPF in VSAN 7.
switch
switch(config)# fspf enable vsan 5
switch(config)# no fspf enable vsan 7
Related Commands Command
fspf config vsan
show fspf interface
Cisco MDS 9000 Family Command Reference
8-78
fspf enable vsan vsan-id
no fspf enable vsan vsan-id
Modification
This command was introduced.
#
# config terminal
Description
Configures FSPF features for a VSAN.
Displays information for each selected interface.
Specifies a VSAN ID. The range is 1 to 4093.
Chapter 8 F Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x