Debug Ipsec - Cisco MDS 9000 series Command Reference Manual

debug ipsec

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
debug ipsec
To enable debugging for IPsec, use the debug ipsec command in EXEC mode.To disable a debug
command, use the no form of the command or use the no debug all command to turn off all debugging.
Syntax Description all
bypass ficon_mgr
config
config-detail
demux
deque
error
event
flow
flow-detail
ha
trace
detail
warning
Defaults
None.
Command Modes
EXEC mode.
Command History Release
2.0(x)
Usage Guidelines To use this command, IPsec must be enabled using the crypto ipsec enable command.
Examples
The following example displays the system output when the debug ipsec config command is issued.
switch# debug ipsec config
Cisco MDS 9000 Family Command Reference
6-68
debug ipsec {all | bypass ficon_mgr | config | config-detail | demux | deque | error | event | flow
| flow-detail | ha | trace [detail] | warning}
no debug ipsec {all | bypass ficon_mgr | config | config-detail | demux | deque | error | event |
flow | flow-detail | ha | trace [detail] | warning}
Enables all IPsec debugging.
Bypasses the FICON manager.
Enables debugging for IPsec configuration.
Enables debugging for detailed IPsec configuration.
Enables debugging for IPsec message demux.
Enables debugging for IPsec message dequeue.
Enables debugging for IPsec errors.
Enables debugging for IPsec FSM and events.
Enables debugging for IPsec flow.
Enables debugging for detailed IPsec flow.
Enables debugging for IPsec high availability.
Enables debugging for IPsec trace.
Specifies detailed trace.
Enables debugging for IPsec warning.
Modification
This command was introduced.
Chapter 6 Debug Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x