Debug License - Cisco MDS 9000 series Command Reference Manual

debug license

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
debug license
To enable licensing debugging, use the debug license command in EXEC mode. To disable a debug
command, use the no form of the command or use the no debug all command to turn off all debugging.
Syntax Description
all
errors
events
mts
Defaults
Disabled.
Command Modes EXEC mode.
Command History Release
1.0(2)
Usage Guidelines
None.
Examples
The following example displays the system output when the debug license all command is issued:
switch# debug license all
Related Commands Command
no debug all
show license
Cisco MDS 9000 Family Command Reference
6-76
debug license {all | errors | event s | mts}
no debug license {all | errors | events | mts}
Modification
This command was introduced.
Description
Disables all debugging.
Displays license information.
Enables debugging for all licensing features.
Enables debugging for licensing error conditions.
Enables debugging for the licensing events.
Enables debugging for Tx/Rx packets of MTS.
Chapter 6 Debug Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x