Debug Sensor - Cisco MDS 9000 series Command Reference Manual

Chapter 6 Debug Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

debug sensor

To enable debugging for the sensor manager, use the debug sensor command in EXEC mode. To disable
a debug command, use the no form of the command or use the no debug all command to turn off all
debugging.
Syntax Description demux
deque
error
info
init
Defaults Disabled.
Command Modes EXEC mode.
Command History Release
1.0(2)
Usage Guidelines
Use this command to debug sensor manager events and information.
Examples The following example displays the system output when the debug sensor info command is issued:
switch# debug sensor info
Related Commands Command
no debug all
show environment temperature
OL-8413-07, Cisco MDS SAN-OS Release 3.x
debug sensor {demux | deque | error | info | init}
no debug sensor {demux | deque | error | info | init}
Modification
This command was introduced.
Enables debugging for sensor demux functions.
Enables debugging for sensor deque events.
Enables debugging for sensor errors.
Enables debugging for sensor information.
Enables debugging for sensor initialization.
Description
Disables all debugging.
Displays current temperature threshold settings and state.
Cisco MDS 9000 Family Command Reference
debug sensor
6-111