Ssh - Cisco MDS 9000 series Command Reference Manual

Chapter 21 S Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

ssh

To initiate a Secure Shell (SSH) session, use the ssh command in EXEC mode.
Syntax Description
hostname
userid
Defaults The default user name is admin.
Command Modes EXEC mode.
Command History Release
1.0(2)
Usage Guidelines None.
Examples The following example shows how to initiate an SSH session using a host name.
switch# ssh host1
admin@1host1's password:
The following example shows how to initiate an SSH session using a host IP address.
switch# ssh 10.2.2.2
admin@10.1.1.1's password:
The following example shows how to initiate an SSH session using a user name host name.
switch# ssh user1@host1
user1@1host1's password:
Related Commands Command
show ssh key
ssh server enable
OL-8413-07, Cisco MDS SAN-OS Release 3.x
ssh {hostname | userid@hostname}
Specifies the name or IP address of the host to access.
Specifies a user name on a host.
Modification
This command was introduced.
Description
Displays SSH key information.
Enables SSH server.
Cisco MDS 9000 Family Command Reference
ssh
21-47