Cisco MDS 9000 series Command Reference Manual page 878

scsi-flow flow-id
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Examples The following example configures a SCSI flow with a flow identifier of 4 and the following attributes:
•
•
•
•
switch# config terminal
switch(config)# scsi-flow flow-id 4 initiator-vsan 101 initiator-pwwn
21:00:00:e0:8b:05:76:28 target-vsan 101 target-pwwn 21:00:00:20:37:38:67:cf
The following example disables a SCSI flow with a flow identifier of 4.
switch(config)# no scsi-flow flow-id 4
The following example configures SCSI flow 4 to gather statistics about the SCSI flow.
switch(conf)# scsi-flow flow-id 4 statistics
The following example disables the statistics gathering feature on SCSI flow 4.
switch(conf)# no scsi-flow flow-id 4 statistics
The following example configures SCSI flow 4 with write acceleration.
switch(conf)# scsi-flow flow-id 4 write-acceleration
The following example configures SCSI flow 4 with write acceleration and buffers of 1024 credits.
switch(conf)# scsi-flow flow-id 4 write-acceleration buffer 1024
The following example disables the write acceleration feature on SCSI flow 4.
switch(conf)# no scsi-flow flow-id 4 write-acceleration
Related Commands Command
ssm enable feature
show scsi-flow
Cisco MDS 9000 Family Command Reference
21-10
Initiator VSAN number—101
Initiator port WWN—21:00:00:e0:8b:05:76:28
Target VSAN number—101
Target port—WWN 21:00:00:20:37:38:67:cf
Description
Enables the SCSI flow feature on the SSM.
Displays SCSI flow configuration and status.
Chapter 21 S Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x