Clear Ipv6 Access-List - Cisco MDS 9000 series Command Reference Manual

clear ipv6 access-list

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
clear ipv6 access-list
To clear IPv6 access control list statistics, use the clear ipv6 access-list command.
Syntax Description
access-list
list-name
Defaults None.
Command Modes EXEC mode.
Command History Release
3.1(0)
Usage Guidelines You can use the clear ipv6 access-list command to clear IPv6-ACL statistics.
Examples The following example displays information about an IPv6-ACL.
switch# clear ipv6 access-list testlist
switch#
Related Commands Command
ipv6 access-list
show ipv6
Cisco MDS 9000 Family Command Reference
4-52
clear ipv6 access-list [list-name]
Displays a summary of access control lists (ACLs).
Specifies the name of the ACL. The maximum size is 64.
Modification
This command was introduced.
Description
Configures an IPv6-ACL.
Displays IPv6 configuration information.
Chapter 4 C Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x