Periodic-Inventory Notification - Cisco MDS 9000 series Command Reference Manual

Chapter 18 P Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

periodic-inventory notification

To enable the periodic inventory notification message dispatches, use the periodic-inventory
notification command Call Home configuration submode. To revert to the default state, use the no form
of the command.
Syntax Description interval days
Defaults Disabled.
The initial default interval is 7 days.
Command Modes Call Home configuration submode.
Command History Release
2.0(x)
Usage Guidelines None.
Examples The following example shows how to enable periodic inventory notification and use the default interval.
switch# config terminal
switch(config)# callhome
switch(config-callhome)# periodic-inventory notification
The following example shows how to enable periodic inventory notification and set the interval to
10 days.
switch# config terminal
switch(config)# callhome
switch(config-callhome)# periodic-inventory notification interval 10
Related Commands Command
callhome
show callhome
OL-8413-07, Cisco MDS SAN-OS Release 3.x
periodic-inventory notification [interval days]
no periodic-inventory notification
Specifies the notification interval. The range is 1 to 30.
Modification
This command was introduced.
Description
Enters Call Home configuration submode.
Displays Call Home configuration information.
periodic-inventory notification
Cisco MDS 9000 Family Command Reference
18-5