Debug Port-Resources - Cisco MDS 9000 series Command Reference Manual

Chapter 6 Debug Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

debug port-resources

To enable debugging for a port resources module, use the debug port-resources command in EXEC
mode. To disable a debug command, use the no form of the command or use the no debug all command
to turn off all debugging.
Syntax Description all
demux
deque
error
event
ha
mts
trace
warning
Defaults
Disabled.
Command Modes
EXEC mode.
Command History Release
3.0(1)
Usage Guidelines None.
Examples
The following example displays the system output when the debug port-resources demux command is
issued:
switch# debug port-resources demux vsan 2
2006 Jan 19 22:10:59.244892 port-resources: fu_priority_select:
for select call
2006 Jan 19 22:10:59.244985 port-resources: fu_priority_select_select_queue: rou
nd credit(12)
2006 Jan 19 22:10:59.245018 port-resources:
_info(2), priority(7), credit(6), empty
2006 Jan 19 22:10:59.245051 port-resources: fu_priority_select: returning FU_PSE
L_Q_CAT_MTS queue, fd(5), usr_q_info(1)
2006 Jan 19 22:10:59.245168 port-resources: prm_get_data_from_queue(664): dequeued mts msg
(128136), MTS_OPC_DEBUG_WRAP_MSG
OL-8413-07, Cisco MDS SAN-OS Release 3.x
debug port-channel {all | demux | deque | error | event | ha | mts | trace | warning}
no debug port-channel {all | demux | deque | error | event | ha | mts | trace | warning}
Modification
This command was introduced.
Enables all port resources debug options.
Enables debugging of port resources messages.
Enables debugging of port resources message dequeues.
Enables debugging for port resources error conditions.
Enables debugging for port resources FSMs and events.
Enables debugging for port resources high availability.
Enables debugging for port resources message MTS events.
Enables debugging for port resources traces.
Enables debugging for port resources warning.
curr_q - FU_PSEL_Q_CAT_CQ, usr_q
Cisco MDS 9000 Family Command Reference
debug port-resources
- setting fd[5]
6-93