Chapter 14
L Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
logging monitor
To set monitor message logging, use the logging monitor command. To negate the previously issued
command or to revert to factory defaults, use the no form of the command.
Syntax Description
logging monitor
severity level
Defaults
None.
Command Modes
Configuration mode.
Command History
Release
1.0(2)
Usage Guidelines
None.
Examples
The following example sets terminal line (monitor) message logging at level 2.
switch
switch(config)# logging monitor 2
Related Commands
Command
show logging
OL-8413-07, Cisco MDS SAN-OS Release 3.x
logging monitor severity level
Sets message logging.
0-7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug
Modification
This command was introduced.
#
# config terminal
Description
Displays logging configuration information.
Cisco MDS 9000 Family Command Reference
logging monitor
14-19