Isns Profile Name - Cisco MDS 9000 series Command Reference Manual

Chapter 11 I Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

isns profile name

To create an Internet Storage Name Service (iSNS) profile and enter iSNS profile configuration
submode, use the isns profile name command in configuration mode. To delete the iSNS profile, use the
no form of the command.
Syntax Description profile-name
Defaults None.
Command Modes
Configuration mode.
Command History Release
1.3(1)
Usage Guidelines To use this command, iSNS must be enabled using the isns-server enable command.
Examples
The following example shows how to specify an iSNS profile name and enter iSNS profile configuration
submode.
switch# config terminal
switch(config)# isns profile name UserProfile
switch(config-isns-profile)#
Related Commands Command
server
show isns
OL-8413-07, Cisco MDS SAN-OS Release 3.x
isns profile name profile-name
no isns profile name profile-name
Specifies the profile name. Maximum length is 64 characters.
Modification
This command was introduced.
Description
Configures a server IP address in an iSNS profile.
Displays iSNS information.
Cisco MDS 9000 Family Command Reference
isns profile name
11-115