Debug Fcns - Cisco MDS 9000 series Command Reference Manual

debug fcns

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
debug fcns
To enable debugging for name server registration, use the debug fcns command in EXEC mode. To
disable a debug command, use the no form of the command or use the no debug all command to turn
off all debugging.
Syntax Description all
errors
events
mts
query
register
vsan vsan-id
Defaults
Disabled.
Command Modes EXEC mode.
Command History Release
1.0(2)
Usage Guidelines
None.
Examples The following example displays the system output when the debug fcns events register vsan 99
command is issued:
switch# debug fcns events register vsan 99
Feb 17 04:42:54 fcns: vsan 99: Got Entry for port-id 27800
Feb 17 04:42:54 fcns: vsan 99: Registered port-name 36a4078be0000021 for port-id 780200
Feb 17 04:42:54 fcns: vsan 99: Registered node-name 36a4078be0000020 for port-id 780200
...
Cisco MDS 9000 Family Command Reference
6-42
debug fcns {all | errors | events {mts | query | register}} [vsan vsan-id]
no debug fcns {all | errors | events {mts | query | register}} [vsan vsan-id]
Modification
This command was introduced.
Enables debugging for all name server features.
Enables debugging for name server error conditions.
Enables debugging for name server events.
Enables debugging for name server tx/rx MTS packets.
Enables debugging for name server tx/rx CDP packets.
Enables debugging for name server PSS related events.
Restricts debugging to the specified VSAN.
Chapter 6 Debug Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x