Dpvm Enable - Cisco MDS 9000 series Command Reference Manual

Chapter 5 D Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

dpvm enable

To enable dynamic port VSAN membership (DPVM), use to dpvm enable command. To disable DPVM,
use the no form of the command.
Syntax Description
This command has no other arguments or keywords.
Defaults
Disabled.
Command Modes Configuration mode.
Command History Release
2.0(x)
Usage Guidelines
The configuration and verification commands for DPVM are only available when DPVM is enabled on
the switch. When you disable this feature, all related configurations are automatically discarded.
Examples The following example shows how to enable DPVM.
switch# config terminal
switch(config)# dpvm enable
Related Commands Command
dpvm activate
dpvm database
show dpvm
OL-8413-07, Cisco MDS SAN-OS Release 3.x
dpvm enable
no dpvm enable
Modification
This command was introduced.
Description
Activates the DPVM database.
Configures the DPVM database.
Displays DPVM database information.
Cisco MDS 9000 Family Command Reference
dpvm enable
5-45