Show Fcanalyzer - Cisco MDS 9000 series Command Reference Manual

Chapter 22 Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

show fcanalyzer

To display the list of hosts configured for a remote capture, use the show fcanalyzer command.
Syntax Description
This command has no arguments or keywords.
Defaults None.
Command Modes EXEC mode.
Command History Release
1.0(2)
Usage Guidelines
The
connect to the client.
Examples The following example displays configured hosts.
switch# show fcanalyzer
PassiveClient = 10.21.0.3
PassiveClient = 10.21.0.3
ActiveClient = 10.21.0.3, DEFAULT
OL-8413-07, Cisco MDS SAN-OS Release 3.x
show fcanalyzer
Modification
This command was introduced.
keyword shown with the
default
entry specifies that the default port is used to
ActiveClient
Cisco MDS 9000 Family Command Reference
show fcanalyzer
22-69