Clear Fc-Redirect Config Vt - Cisco MDS 9000 series Command Reference Manual

clear fc-redirect config vt

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
clear fc-redirect config vt
To delete a FC-Redirect configuration on a switch, use the clear fc-redirect config command.
Syntax Description
vt vt-pwwn
local-switch-only
Defaults None.
Command Modes EXEC mode.
Command History Release
3.2(1)
Usage Guidelines This command is used as a last option if deleting the configuration through the application is not
possible.
This command will delete any configuration (including active configurations) on FC-Redirect created by
applications such as SME/DMM that may lead to data loss. When you enter this command, the host
server communicates to the storage array directly by passing the individual Intelligent Service
Applications causing data corruption. Use this command as a last option to clear any leftover
configuration that cannot be deleted from the application (DMM/SME). Use this command while
decommissioning the switch.
Examples The following example clears the FC-Redirect configuration on the switch.
switch# clear fc-redirect config vt 2f:ea:00:05:30:00:71:64
Deleting a configuration MAY result in DATA CORRUPTION.
Do you want to continue? (y/n) [n] y
Related Commands Command
show fc-redirect
active-configs
Cisco MDS 9000 Family Command Reference
4-44
clear fc-redirect config vt vt-pwwn [local-switch-only]
Specify the VT pWWN for the configuration to be deleted.
(Optional) The configuration is deleted locally only.
Modification
This command was introduced.
Description
Displays all active configurations on the switch.
Chapter 4 C Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x