Rscn - Cisco MDS 9000 series Command Reference Manual

Chapter 20 R Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

rscn

To configure a registered state change notification (RSCN), a Fibre Channel service that informs Nx
ports about changes in the fabric, use the rscn command in configuration mode.
Syntax Description multi-pid
suppress domain-swrscn Suppresses transmission of domain format SW-RCSNs.
vsan vsan-id
Defaults
None.
Command Modes Configuration mode.
Command History Release
1.0(2)
Usage Guidelines
None.
Examples The following example configures RSCNs in multi-PID format.
switch# config terminal
switch(config)# rscn multi-pid vsan 1
Related Commands Command
show rscn src-table
show rscn statistics
OL-8413-07, Cisco MDS SAN-OS Release 3.x
rscn {multi-pid | suppress domain-swrscn} vsan vsan-id
Sends RSCNs in multi-PID format.
Configures VSAN information or membership. The ID of the VSAN is
from 1 to 4093.
Modification
This command was introduced.
Description
Displays state change registration table,
Displays RSCN statistics.
Cisco MDS 9000 Family Command Reference
rscn
20-35