Debug Scsi-Target - Cisco MDS 9000 series Command Reference Manual

Chapter 6 Debug Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

debug scsi-target

To enable debugging for SCSI targets, use the debug scsi-target command in EXEC mode. To disable
a debug command, use the no form of the command or use the no debug all command to turn off all
debugging.
Syntax Description error
flow
Defaults Disabled.
Command Modes
EXEC mode.
Command History Release
1.1(1)
Usage Guidelines None.
Examples The following example displays the system output when the debug scsi-target flow command is issued:
switch# debug scsi-target flow
Apr 28 21:11:52 vhbad: vhba_mts_handler: sdwrap_dispatch: retval:0
Apr 28 21:11:54 vhbad: vhbad_handle_timeout: timer:1 context:(nil)
Apr 28 21:12:06 vhbad: vhba_mts_handler: sysmgr_dispatch: retval:-1
Related Commands Command
no debug all
show scsi-target
OL-8413-07, Cisco MDS SAN-OS Release 3.x
debug scsi-target {error | flow}
no debug scsi-target {error | flow}
Modification
This command was introduced.
Description
Disables all debugging.
Displays information about existing SCSI target configurations.
Enables debugging for SCSI target daemon error conditions.
Enables debugging for the SCSI target flow.
Cisco MDS 9000 Family Command Reference
debug scsi-target
6-107