Rmon Alarm - Cisco MDS 9000 series Command Reference Manual

Chapter 20 R Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

rmon alarm

To configure a remote monitoring (RMON) alarm, use the rmon alarm command in configuration mode.
To delete an RMON alarm, use the no form of the command.
Syntax Description alarm-number
mib-object
sample-interval
absolute
delta
rising-threshold value
rising-event
falling-threshold value Specifies the falling threshold value. The range is –2147483648 to
failing-event
owner alarm-owner
Defaults Disabled.
Command Modes
Configuration mode.
Command History Release
2.0(x)
Usage Guidelines The events that can be triggered are configured using the rmon event command.
OL-8413-07, Cisco MDS SAN-OS Release 3.x
rmon alarm alarm-number mib-object sample-interval {absolute | delta} rising-threshold value
[rising-event] falling-threshold value [falling-event] [owner alarm-owner]
no rmon alarm alarm-number
Specifies the RMON alarm number. The range is 1 to 65535.
Specifies the MIB object to monitor. Maximum length is 80 characters.
Note
Specifies the sample interval in seconds. The range is 1 to 2147483647.
Tests each sample directly.
Tests the delta (or difference) between samples.
Specifies the rising threshold value. The range is –2147483648 to
2147483647.
Specifies the event to trigger on rising threshold crossing. The range is 1 to
65535.
2147483647.
Specifies the event to trigger on rising threshold crossing. The range is 1 to
65535.
Specifies an owner for the alarm. Maximum size is 80 characters.
Modification
This command was introduced.
The MIB object identifier must be fully numbered, dotted-decimal
notation, not the text string description.
Cisco MDS 9000 Family Command Reference
rmon alarm
20-25