Debug Rdl Errors - Cisco MDS 9000 series Command Reference Manual

Chapter 6 Debug Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

debug rdl errors

To enable debugging for RDL errors, use the debug rdl errors command in EXEC mode. To disable a
debug command, use the no form of the command or use the no debug all command to turn off all
debugging.
Syntax Description
This command has no other arguments or keywords.
Defaults
Disabled.
Command Modes EXEC mode.
Command History Release
1.0(2)
Usage Guidelines
None.
Examples
The following example displays the system output when the debug rdl errors command is issued:
switch# debug rdl errors
Related Commands Command
no debug all
OL-8413-07, Cisco MDS SAN-OS Release 3.x
debug rdl errors
Modification
This command was introduced.
Description
Disables all debugging.
Cisco MDS 9000 Family Command Reference
debug rdl errors
6-99