Clear Rscn Session Vsan - Cisco MDS 9000 series Command Reference Manual

clear rscn session vsan

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
clear rscn session vsan
To clear a Registered State Change Notification (RSCN) session for a specified VSAN, use the clear
rscn session vsan command.
Syntax Description vsan-id
Defaults None.
Command Modes EXEC mode.
Command History Release
3.0(1)
Usage Guidelines
None.
Examples The following example clears an RSCN session on VSAN 1.
switch# clear rscn session vsan 1
Related Commands Command
rscn
show rscn
Cisco MDS 9000 Family Command Reference
4-70
clear rscn session vsan vsan-id
Specifies a VSAN where the RSCN session should be cleared. The ID of the
VSAN is from 1 to 4093.
Modification
This command was introduced.
Description
Configures an RSCN.
Displays RSCN information.
Chapter 4 C Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x