Ivr Copy Active-Topology User-Configured-Topology - Cisco MDS 9000 series Command Reference Manual

Chapter 11 I Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

ivr copy active-topology user-configured-topology

To copy the active inter-VSAN routing (IVR) VSAN topology to the user configured topology, use the
ivr copy active-topology user-configured-topology command in EXEC mode.
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes
EXEC mode.
Command History Release
3.0(1)
Usage Guidelines The ivr copy active-topology user-configured-topology command is useful if you need to edit the
active IVR topology, which is not allowed. Instead you copy the active IVR topology to the user
configured topology, and then edit the user configured topology.
Examples The following example copies the active IVR topology to the user configured topology.
switch# ivr copy active-topology user-configured-topology
Successfully copied active VSAN-topology to user-configured topology database
Related Commands Command
ivr copy active-zoneset
full-zoneset
ivr copy auto-topology
user-configured
topology
show ivr vsan topology
OL-8413-07, Cisco MDS SAN-OS Release 3.x
ivr copy active-topology user-configured-topology
Modification
This command was introduced.
Description
Copies the active zone set to the full zone set.
Copies the automatically discovered inter-VSAN routing (IVR) VSAN
topology to the user configured topology.
Displays the IVR VSAN topology configuration.
ivr copy active-topology user-configured-topology
Cisco MDS 9000 Family Command Reference
11-121